Cost calculator for cabinet shops

Make or buy your cabinet doors? Work out the real cost.

Work out what one-piece MDF/HDF doors cost to make in your own shop, and the price below which buying them costs less. Every number on this page is in plain text, the calculator is optional, and each default is either sourced or marked as an assumption to replace with your own.

We machine the doors. You build the cabinets.

Run your numbers

Last updated: November 17, 2026

01 — Short answer

The short answer

If your shop has spare CNC time and spare hands, making one-piece MDF/HDF doors yourself usually costs less in cash than buying them. Buying pays when your CNC, spray booth or people are the bottleneck, when each shop hour you free up earns more than the price difference, on small orders where setup eats the time, or when you would have to hire to take on more work. In the kitchen example below, 40 doors (120 sq ft) cost about $966 to make, using Connecticut average cabinetmaker pay and the assumptions listed on this page. So buying beats making in cash if the quote for those doors comes in under $966.28, about $8.05 per sq ft of door. Buying also frees about 9.9 labor hours and 2.2 CNC hours, and what those hours earn your shop can justify a higher quote.

Making usually wins when

  • Your CNC has idle hours
  • People in the shop have spare time
  • You run large batches of one style
  • You need a replacement door the same day
  • You already own the tooling and finishing setup

Buying usually wins when

  • The CNC is booked cutting cabinet boxes
  • The spray booth or finishing room is the bottleneck
  • You would have to hire to take more work
  • Orders are small and setup dominates
  • You want the door price fixed before the job starts
02 — Worked example

Worked example: a 40-piece kitchen (sanded)

40 doors and drawer fronts averaging 18" × 24" = 120 sq ft, sanded, made from your own board on your own CNC with the default assumptions below. The total is also the break-even quote: the most the same doors, bought sanded, can cost before buying costs more in cash.

LineMake in your shop
Board5.36 sheets (4×8, 70% usable) × $55 = $294.64
CNC time2.23 h × ($30 machine + $41.44 operator) = $159.46
Hand work (sanding, inspection, handling)40 × 10 min = 6.67 h × $41.44 = $276.25
Setup, programming, handling1.00 h × $41.44 = $41.44
Overhead9.90 labor h × $15 = $148.48
Scrap and rework5% = $46.01
TOTAL$966.28 ($24.16 a piece, $8.05 per sq ft)
Break-even quote$966.28 all-in for the 40 pieces, about $8.05 per sq ft of door. A sanded quote under this costs less in cash than making.

Buying beats making in cash if your quote for these 40 doors comes in under $966.28, about $8.05 per sq ft of door. Buying also frees 9.90 labor hours and 2.23 CNC hours. If those hours go to other paying work, a higher quote can still pay: each $10 an hour they earn raises the break-even by $98.99 (about $0.82 per sq ft). The rule: buy when (quote − make cost) ÷ hours freed is less than what an hour of other work earns your shop.

Primed instead: making is $1,266.32 if priming takes 6 minutes a piece (4.00 h) plus $0.50 per sq ft of primer. A primed quote beats making in cash if it comes in under $1,266.32 (about $10.55 per sq ft of door), and buying frees 13.90 labor hours.

Compare like with like: the same board and the same finish stage on both sides. If you would make the doors from HDF, enter your HDF sheet price. Bought doors still need receiving and inspection, and this example counts no time for that or for a pickup trip. With a 60-minute round trip to Danbury, the break-even quote drops by $41.44 to $924.84 (about $7.71 per sq ft of door), and buying frees 8.90 labor hours.

03 — Small order

Worked example: a 6-door punch list

6 doors at 15" × 30" = 18.75 sq ft, sanded, no pickup trip, same assumptions as the kitchen.

  • Make: board 0.84 sheet × $55 = $46.04; CNC 0.35 h × $71.44 = $24.92; hand work 1.00 h = $41.44; setup 1.00 h = $41.44; overhead 2.35 h × $15 = $35.23; scrap 5% = $9.45. Total $198.52.
  • Break-even: a quote under $198.52, about $10.59 per sq ft of door ($33.09 a piece), costs less in cash than making. Buying frees 2.35 labor hours.
  • Zauber order terms: no minimum quantity and a $175 minimum order charge. Delivery is for orders of $750 or more. Ready for pick up in 3 to 5 days in Danbury.

On small orders the setup hour doesn't shrink, so making costs more per sq ft: $10.59 here against $8.05 for the kitchen. Compare each quote with the break-even for that order, not with the kitchen's per-sq-ft figure.

04 — Sensitivity

What changes the answer

The kitchen example (120 sq ft, sanded, no pickup trip) with one assumption changed at a time. With no pickup trip, the break-even quote is the cost to make.

Change one assumptionCost to make (break-even quote)Labor hours freedBreak-even per sq ft of door
Hand work 5 min a piece$768.756.57$6.41
Hand work 10 min a piece (default)$966.289.90$8.05
Hand work 15 min a piece$1,163.8113.23$9.70
Hand work 30 min a piece$1,756.4023.23$14.64
A $75/h shop rate that already includes overhead (overhead set to $0)$1,159.229.90$9.66

The answer moves most with the hands-on minutes each door really takes. If you build 5-piece doors, count milling, glue-up, clamping and joint sanding too.

05 — Calculator

Run your own numbers

Change any number and the results update. The defaults are the kitchen example; section 07 says where each one comes from. The page does not save or send what you enter.

The calculator holds no supplier prices. It works out your cost to make the doors and the break-even quote: the most a quote for the same doors can be before buying costs more in cash. If you have a Zauber quote, enter its total under Optional to compare.

Your order
Your shop
Optional
Make in your shop
$966.28
Board: 5.36 sheets × $55.00 = $294.64CNC: 2.2 h × $71.44 = $159.46Hand work: 6.7 h × $41.44 = $276.25Setup: 1.0 h = $41.44Overhead: 9.9 labor h × $15.00 = $148.48Scrap and rework 5% = $46.01$24.16 a piece · $8.05 per sq ft of door
Break-even quote
$966.28
About $8.05 per sq ft of door · $24.16 a pieceAn all-in quote under this costs less in cash than making.

Buying beats making if your quote for these doors comes in under $966.28 (about $8.05 per sq ft of door). Buying also frees 9.9 labor hours and 2.2 CNC hours.

Get your exact price in a free quote, usually within one or two hours.

Labor hours in the make column: 9.9 (CNC 2.2, hand work 6.7, setup 1.0).

06 — Formula

The formula

  • Square feet = pieces × width × height ÷ 144.
  • Make cost = (board + CNC + hand work + setup + priming + overhead) × (1 + scrap %).
  • Board = square feet ÷ (sheet sq ft × usable %) × sheet price.
  • CNC = sheets × minutes per sheet ÷ 60 × (machine rate + operator rate if someone attends the machine).
  • Hand work = pieces × minutes per piece ÷ 60 × loaded labor rate. Setup = setup minutes ÷ 60 × loaded labor rate.
  • Priming (primed only) = pieces × priming minutes ÷ 60 × loaded labor rate + square feet × primer cost per sq ft.
  • Overhead = labor hours (CNC if attended + hand work + setup + priming) × overhead per hour.
  • Loaded labor rate = hourly wage × payroll and benefits load.
  • Pickup trip = pickup minutes ÷ 60 × loaded labor rate (0 if the order is delivered or shipped).
  • Break-even quote = make cost − pickup trip. An all-in quote below it costs less in cash than making. Break-even per sq ft = break-even quote ÷ square feet.
  • Buy cost = your all-in quote + pickup trip. Hours freed = labor hours above − pickup hours.
  • Break-even hourly value = (buy cost − make cost) ÷ hours freed. Buying pays when an hour of other work earns your shop more than that.
  • Counting what the freed hours earn: buying pays when the quote is below the break-even quote + hours freed × what an hour of other work earns.

Each money line is worked from unrounded hours and rates, rounded to the cent, and then added, so the totals match the lines shown. Hours, sheets and rates are printed rounded.

This is the same method as section 05 of our HDF guide.

07 — Sources

Where the defaults come from

InputDefaultSource or assumption
Order40 pieces at 18" × 24" (120 sq ft)Example kitchen. Assumption: enter your job.
Hourly wage$27.81U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics, May 2025: cabinetmakers and bench carpenters (51-7011), Connecticut mean. Other presets: $28.50 Bridgeport–Stamford–Danbury metro area (BLS area 14860, Bridgeport–Stamford–Danbury, CT); $28.86 New York State; $30.24 New York–Newark–Jersey City metro.
Payroll and benefits load× 1.49BLS Employer Costs for Employee Compensation, June 2026 (released Sept 9, 2026), Table 4. For private-industry production occupations, wages are 67.3% of total compensation, and 1 ÷ 0.673 ≈ 1.49.
Loaded labor rate$41.44/hWage × load. If you use your own all-in shop rate, enter it as the wage, set the load to 1, and set overhead to $0.
Sheet price$55 per 4×8 sheetAssumption. Use your invoice price.
Usable yield70%Assumption. We found no public benchmark; use your nesting reports.
CNC time25 min per sheetAssumption. Use your machine's real cycle time.
CNC machine cost$30/hAssumption: the machine's own cost (payments or depreciation, tooling, vacuum, power, maintenance), without the operator.
Operator attends the CNCYesAssumption.
Hand work10 min per pieceAssumption. Try 5–15.
Setup, programming, handling60 min per jobAssumption.
Overhead$15 per labor hourAssumption: rent, insurance, utilities, supervision.
Scrap and rework5%Assumption. We found no public benchmark; use your own history.
Priming (primed only)6 min per piece + $0.50 per sq ftAssumption.
Pickup trip0 minAssumption: no driver time. Enter your round trip to Danbury; at 60 min the kitchen break-even quote drops by $41.44 to $924.84.
Your Zauber quoteBlankOptional. Your own quote total, all-in, as the quote email shows it. Leave it blank to see the break-even only.

Sources: BLS Occupational Employment and Wage Statistics · BLS Employer Costs for Employee Compensation, June 2026

08 — Zauber quote

Getting a Zauber price

We offer some of the industry's best prices per sq ft. Send your door list and we email an exact quote to set against your own number. Approved trade accounts see their prices in the Door App as they build an order.

  • Enter your sizes in the Door App without signing in, and place an order or an estimate without pricing. We email a quote, usually within one or two hours.
  • Enter the quote total in the calculator above, as the quote email shows it, to compare it with your cost to make. If you pay for delivery or shipping separately, add it to the total.
  • There is no minimum quantity. There is a $175 minimum order charge on the goods; delivery is extra and does not count toward it.
  • Ready for pick up in 3 to 5 days in Danbury. Delivery up to about one hour from Danbury is $55 on orders of $1,200 or more and $110 on orders from $750 to $1,199.99. Outside that area we ship by UPS Ground, with a $110 shipping fee charged up front and applied to the UPS cost.
  • Typical production is 3–5 business days from order confirmation.
  • Glass-ready doors and other options: see the Door App.
09 — Beyond price

What the price doesn't show

Besides the price

  • Typical production is 3–5 business days from order confirmation. Lead times are estimates, not guarantees. See our Terms, section 6.
  • Claims must reach us within five business days of collection or delivery. See our Refund Policy.
  • Every door is routed from a single panel, so there are no rail-and-stile seams to open up or telegraph through paint.
  • Every door in a run comes off the same CNC program, and the profile and sizes stay on file for reorders.
  • We are dedicated to cabinet makers and trade professionals.
  • Ready for pick up in 3 to 5 days in Danbury. Delivery up to about one hour from Danbury on orders of $750 or more.

Honest limits

  • Sanded means paint-ready, not finished, and primed means ready for topcoat.
  • Paint grade only. Not for stain or visible real-wood grain.
  • HDF is not waterproof and is not suitable for continuously wet locations or exterior use.
  • Outside the delivery area we ship by UPS Ground. A $110 shipping fee is charged up front and applied to the UPS cost; any remaining balance is billed as an extra delivery charge.
10 — FAQ

Questions

Is it cheaper to make or buy cabinet doors?

It depends on spare capacity. With spare CNC time and spare hands, making one-piece MDF/HDF doors usually costs less in cash. Buying wins when the CNC, finishing room or people are the bottleneck, on small orders where setup dominates, or when you would have to hire. Compare the extra cost of buying with what the freed hours earn your shop.

How do I work out my true in-house door cost?

Add board cost including waste, CNC time at a machine-hour rate, every hands-on minute at your loaded labor rate, setup and programming, overhead, and scrap or rework. Compare that with a bought door at the same stage of completion, then value the hours you would free.

What is the break-even price for buying cabinet doors?

It is your full in-house cost for the same doors: board, CNC time, hands-on labor at your loaded rate, setup, overhead and scrap, less the cost of any trip to collect the order. A quote below it costs less in cash than making. In this page's kitchen example, 40 doors (120 sq ft) cost $966.28 to make, about $8.05 per sq ft of door. A higher quote can still pay if the hours that buying frees earn your shop more than the difference.

How do I get a Zauber price?

Enter your sizes in the Door App and send the list. No account needed. We email an exact quote, usually within one or two hours. Approved trade accounts see their prices as they build an order. We offer some of the industry's best prices per sq ft. There is a $175 minimum order charge and no minimum quantity.

How long do Zauber doors take?

Typical production is 3–5 business days from order confirmation. Rush is sometimes available when scheduling allows. Call (203) 947-9323 before you order.

Where does Zauber deliver?

Orders are ready for pick up in 3 to 5 days at 11 Precision Rd, Danbury, CT 06810, Monday to Friday, 8–4. We deliver up to about one hour from Danbury on orders of $750 or more. That reaches Fairfield, New Haven and Litchfield counties and into Westchester and Putnam, NY. Delivery is $55 on orders of $1,200 or more and $110 on orders from $750 to $1,199.99. Outside that area we ship by UPS Ground. We charge a $110 shipping fee up front, which is applied to the UPS cost; any remaining balance is billed as an extra delivery charge once the order is weighed.

What if a door is wrong or defective?

Claims must reach us within five business days of collection or delivery. See our Refund Policy.

Who do you work with?

We are dedicated to cabinet makers and trade professionals: cabinet shops, millwork companies, closet companies, remodelers, contractors and refacers. One-off orders are welcome, with no minimum quantity and no account required.

Price your real list

We offer the industry's best lead time and pricing per square foot. Enter your sizes in the Door App: approved trade accounts see their prices as they build the order, and everyone else gets an exact quote by email, usually within one or two hours.

Further reading

The worked examples are illustrations, not quotes, and use only the make-side assumptions on this page. Your costs will differ. Your exact Zauber price is in the Door App for approved trade accounts, or in your emailed quote. Wage figures: U.S. Bureau of Labor Statistics, OEWS May 2025 and ECEC June 2026.